ECOCART Multi

Multiple Cartridge Filter Housings. ECOCART cartridge filter housings (EKF) are made in a lightweight SS 304 construction for use with standard DOE filter cartridges. The housings feature a V-clamp closure sealing with an NBR O-ring. FPM is available as an option. ECOCART cartridge filters are manufactured as self-standing versions (500 series) or with legs (1200 series and larger). To mount a gauge or a vent to the housing, the lids are equipped with ¼" BSP female ports. There are ¼" BSP drains for clean and dirt-drain in the lower part of the housing. All filter cartridges (DOE style) are secured by means of a hold down plate tightened with a center rod/bolt. ECOCART cartridge filter housings are suitable for all standard DOE (double open end) cartridges, with a maximum outside diameter of 71 mm.

Core features

• Surfaces electropolished outside, pickled inside
• Parts in contact with product in stainless steel 316
• Filter cartridges in double open ended (DOE) design can be used in lengths of 10", 20", 30" or 40"
• For the installation of a gauge ora vent valve, the vessel cover isequipped with a ¼" BSP socket
• Maximum operating pressure: 150 PSI or 300 PSI
• Maximum operating temperature: 93 °C (depending on housing type, see Technical Data Sheet)

Options

• EPDM O-Ring, optionally available in FKM
• EPDM: Ethylene Propylene Diene Monomer Rubber
• FKM: Fluoro Rubber

Applications

• Coarse filtration > 500 μm
• Medium filtration > 10 μm
• Fine filtration < 10 μm
• Pre-filtration
• Batch filtration
• Circuit filtration
• Water, waste water
• Chemical industry
• Water treatment
• Galvanic industry
• Metal cleaning
• Automotive industry
• Paint and lacquer

Documents

Filter housing ECOCART Multi

Filter Cartridge overview

*Technical datasheets for specific configurations are available upon request